Apcomin Zinc Phosphate Primer

Apcomin Zinc Phosphate Primer is a single‑pack, air‑drying oleo‑resinous primer formulated with zinc phosphate pigment for corrosion protection of steel. It offers good adhesion, rust inhibition and compatibility with conventional alkyd‑based protective coating systems.

Key Features

Good adhesion to prepared steel
Easy application by brush
Heat Resistance: Continuous 60° c, Intermittent 8030° C

/content/dam/ap-bn-revamp/professionals/images/system-layer-image/Asian_Paints_PC_Packshot.png

System Properties

Red oxide & Grey

Colour

Gloss Matt

Volume solids Approx. 46%

Recommended DFT / Coat 30 - 40 microns

Theoretical covering capacity 15.3 sq. mtr/l at 30 microns DFT 11.5 sq. mtr/l at 40 microns DFT

Flash point Not below 30° C

1 hour

Drying time at 30° C Surface dry

16 hours

Hard dry

16 hours

Over coating interval at 30° C Min.

Unlimited, provided surface is dry and clean from all contamination

Max.

Shelf life (cool and dry place at 30° C) At least 12 months

All Products