For Consumers
For Professionals
Search
Best Results
Marine Enamel
Marine Enamel is a single-pack, air-drying, high-gloss alkyd finish designed to provide durable appearance and weather resistance for marine and coastal steel applications.
Key Features
- Easy application by brush with excellent flow.
- Good weather resistance.
- Good colour retention.
- Can be applied over adherent alkyd, epoxy and polyurethane coatings.
- Meets the requirement of IS:2932 & IS:8662 specifications.
System Properties
Range
Colour
Glossy
Gloss
Approx.42%
Volume solids
20 - 25 microns
Recommended DFT/Coat
21 sq.mtr/l at 20 microns DFT 16.8 sq.mtr/l at 25 microns DFT
Theoretical covering capacity
Not below 30oC
Flashpoint
4 hour
Surface dry
Drying time at 30oC
16 hours
Hard dry
16 hours
Over coating interval at 30oC Min.
Unlimited, provided surface is dry and clean From all contamination
Max.
At least 12 months
Shelf life (cool and dry place at 30oC)
The product is not recommended for continuous immersion in water or continuous splash of water
The maximum performance is achieved after complete drying.
At higher relative humidity, drying may get retarded
AT higher DFT wrinkling of the surface will be seen.
All Products
Marine Enamel
Marine Enamel
Technical documents: