smartcare vitalia-neo

Asian Paints SmartCare Vitalia Neo is an integral liquid waterproofing compound with advanced formulation and superior plasticizing additives for cement concrete, mortar and plasters. The product is formulated with selected surface active plasticizing agents, chemicals & additives which make the cement concrete/plaster mix cohesive and upon curing, reduces water permeability.
Image

benefits

water impermeability

water impermeability

Improves waterproofing of concrete and hence increases durability.

compressive strength

compressive strength

imparts higher compressive strength even at more than recommended dosage.

compatibility

compatibility

Mixes easily with concrete/mortar mixes.

shrinkage

shrinkage

Resists crack formation due to drying shrinkage

workability

workability

Improves workability of freshly mixed cement concrete

corrosion resistance

corrosion resistance

Resists corrosion of reinforcement steel due to water and chloride ions penetration.

available packs

Shelf life: If stored in original sealed container, 2 years from the date of manufacturing

Coverage


tile dimensions, mm
length width thickness
300 300 8
300 300 10
300 300 20
300 600 10
330 330 10
450 450 12
600 600 12
200 300 6
consumption, Kg/Sq m
tile joint of width, mm
3 4 5
0.32 0.42 0.53
0.39 0.53 0.66
0.80 1.06 1.33
0.30 0.40 0.50
0.36 0.48 0.60
0.32 0.42 0.53
0.24 0.32 0.40
0.29 0.39 0.49
consumption calculator

Please enter your Tile Dimensions :




Coverage as per the Tile Dimensions entered :


Continue to find out the total grout required (in Kgs)
Total tile grout required:
#Note: Actual coverage might vary with the surface condition and the quality of workmanship. The above figures are for indicative purposes only.

Coverage


Tile Dimensions, mm
length width thickness
300 300 8
300 300 10
300 300 20
300 600 10
330 330 10
450 450 12
600 600 12
200 300 6
consumption, Kg/Sq m
tile joint of width, mm
3 5 8 10
0.26 0.44 0.71 0.89
0.33 0.56 0.89 1.12
0.67 1.12 1.79 2.24
0.25 0.42 0.67 0.84
0.30 0.51 0.81 1.01
0.26 0.44 0.71 0.89
0.20 0.33 0.53 0.67
0.25 0.42 0.67 0.84
consumption calculator

Please enter your Tile Dimensions :




Coverage as per the Tile Dimensions entered :


Continue to find out the total grout required (in Kgs)
Total tile grout required:
#Note: Actual coverage might vary with the surface condition and the quality of workmanship. The above figures are for indicative purposes only.

precautions

  • Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.
  • Do not over-thin or over-extend the brush.
  • Do not dispose of excess material over natural vegetation.
  • Avoid contact with bare skin. In case of contact, wash the effected part immediately with water.
  • Do not add Vitalia Neo directly to cement or dry mix. Always add to gauging water. Maintain water cement ratio as low as possible.

similar products

faqs

what is SmartCare?

Asian Paints SmartCare is a revolutionary range of hi-tech products, tailor-made to address specific dampness problems, and the waterproofing needs of your home.

what is the dosage for SmartCare Vitalia Neo?

The recommended dosage is 100ml of SmartCare Vitalia Neo for 50kg cement.

in what shade is SmartCare Vitalia Neo available?

The SmartCare Vitalia Neo is available in a Colourless/clear form.

what are the recommended areas of application for SmartCare Vitalia Neo?

SmartCare Vitalia Neo can be used for waterproofing of concrete and sand-cement mortars used in:

1. Water tanks & water retaining structures

2. Basements

3. Roof slabs and screeds 

4. External and internal plaster 

5. Bathrooms 

6. Sumps and drains 

7. Brick Laying mortar

what are the available pack sizes of SmartCare Vitalia Neo?

SmartCare Vitalia Neo is available in 100ml, 500ml, 1 & 5 litre packs.

what are the precautions to be observed while applying SmartCare Vitalia Neo?

There are a few precautions to be taken while applying SmartCare Vitalia Neo:

1. Do not apply SmartCare Vitalia Neo when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hours of application.

2. Do not over-thin or over-extend the brush.

3. Do not dispose of excess material over natural vegetation.

4. Avoid contact with bare skin. In case of contact, wash the effected part immediately with water. 

5. Do not add Vitalia Neo directly to cement or dry mix. Always add to gauging water. Maintain water cement ratio as low as possible.

in what form is SmartCare Vitalia Neo available?

SmartCare Vitalia Neo is available as a liquid with very low viscosity.

what is the colour of SmartCare Vitalia Neo?

SmartCare Vitalia Neo is opaque white in colour.

what is the drying time for SmartCare Vitalia Neo?

The drying time of SmartCare Vitalia Neo is a minimum 6 hours, depending on temperature & humidity of the surroundings.

what is the shelf-life (expiry date) of SmartCare Vitalia Neo?

If stored in original sealed container, the shelf-life of SmartCare Vitalia Neo is 2 years from the date of manufacturing.

what is the application procedure for SmartCare Vitalia Neo?

The application procedure for SmartCare Vitalia Neo is comprised of eight steps:

1. Charge cement and aggregates to concrete mixer as per the mix design.

2. Mix in dry state for 1-2 minutes.

3. Add 50 to 60 % of mixing/gauging water.

4. Mix for 2-3 minutes.

5. Stir the Vitalia container well before use.

6. Vitalia Neo needs to be added as per the recommended dosage into the remaining mixing/gauging water, then add to concrete mixer and mix for another 2-3 minutes.

7. Place the concrete or apply plaster as needed.

8. Cure the applied mortar or concrete as per good construction practices.

what is the price of SmartCare Vitalia Neo?

The approximate price is Tk. 52 /- for 100 milli litres, Tk. 160 /- for 500 milli litres , Tk. 300/- for 1 litre, Tk. 1250/- for 5 litres.

what are the advantages of SmartCare Vitalia Neo over its competitors?

The advantages of SmartCare Vitalia Neo are as follows:

1. SmartCare Vitalia Neo requires lower dosage (100ml per 50 kg cement) whereas other products in market requires higher dosage (200ml per 50 kg cement).

2. It ensures stipulated compressive strength even at double/higher the dosage; whereas the compressive strength of other products reduces with increase in dosage.

3. It has excellent workability for cement concrete & plaster using rock crush sand whereas other products have poor workability when cement is used with rock crush sand.

does SmartCare Vitalia Neo comply with IS standards?

SmartCare Vitalia Neo meets and exceeds requirement of IS 2645 for water impermeability, and IS 9103 for water reduction.

what is SmartCare?

Asian Paints SmartCare is a revolutionary range of hi-tech products, tailor-made to address specific dampness problems, and the waterproofing needs of your home.

what is the dosage for SmartCare Vitalia Neo?

The recommended dosage is 100ml of SmartCare Vitalia Neo for 50kg cement.

in what shade is SmartCare Vitalia Neo available?

The SmartCare Vitalia Neo is available in a Colourless/clear form.

view all
Image